Plastic Library Cards vs. Barcode Changes Results
Albion District Library
We use Vanguard ID Systems (http://www.vanguardid.com/) for our library cards. We just purchased about 1,500 of them - full-size plastic, reinforced, with a keychain that matches it.
They came in very inexpensively (about $0.50/each plus set-up and shipping).
With our system (Apollo), it's as easy as just scanning or typing over it in the system. If they have outstanding holds in OverDrive, you just have to be careful. Their existing holds are linked to their current barcode number.
Dorothy Hull Library
We switched from paper to plastic last year. We found The Library Store to be significantly cheaper than other vendors we looked at. We also did NOT go with key tags, even though we initially planned to. Most of our patrons did not want them. That worked for us as well because we again saved money.
We used one of their stock designs and it was all pretty painless. We did not have your barcode issues as ours were the standard number of digits.
Willard Library
If you are interested, here at Willard Library we wrote our own Library card software that uses a webcam at each circulation station to get a mug shot and we print them out on inexpensive card printers. No need to have them pre-printed, we just buy blank cards. If you are interested I would be happy to demo it for you.
Shiawassee District Library - Owosso
We haven't switched to plastic cards, but we are gradually switching from a 5 digit barcode to a 13 digit with a check digit (14 digits in all). Our circ system can handle both so we are not replacing old cards, just issuing the new barcodes for new cards. There haven't been any problems with Overdrive and MeL both work with the new circ system without the patrons being aware of it. However, in spite of plenty of publicity, 2 years later we still have patrons who can't figure out why they can't log into Overdrive as they no longer need to add a prefix to their card numbers. Card numbers are also harder to memorize which some patrons dislike.
We started all the 13 digit barcodes with a 2 which we were told is standard. The rest of the numbers are up to you. We chose the number of our zv code plus a 9 so numbers look like 22559000xxxxx plus the computer generated check digit. The xxxxx part of the number is issued sequentially so the zeros will also be added numbers if and when we need them.
Franklin Public Library
We are the smallest library in The Library Network co-op. We recently joined RBdigital and realized that all of our barcodes that we had been ordering through TLN (as we do our plastic library cards) were not going to be compatible with RBdigital. We did not need to buy new cards but we did need the new barcodes which we just purchased through Demco. I did have to work closely with TLN to make sure we had the correct format. We have been using the new barcodes for all new cards we give out and if anyone wants to access RBdigital they will also need a new barcode for their card. Because our old barcodes are compatible with OverDrive, MelCat and Freegal we didn't need to replace everyone's cards just those people who wanted to access RBdigital and of course every new card we give out.
It might be painful to switch all of your patrons over but I would think it would be much easier to have one barcode that can access all of your services and that you can now offer to new card holders that you sign up.
Detroit Area Library Network
In the past I was at a library that had to redo all barcodes from scratch. In general, I always recommend moving to a standard barcode. That helps to make sure your codes will work in multiple and various systems. Usually codabar 14 digits, last digit a check sum, is what we have used.
I have recommended Watson Label Products http://wlp.com/. They can do the plastic cards and key tags as well as convert or give you barcode ranges.
North Adams Community Memorial Library
We did it. Our new cards came last March. I went with RACO Industries. That's where we got our receipt printer, wand and stand and our bar codes. I got twice as many library cards for the money as (I think it was DEMCO) wanted. Every time I thought we were ready to order with this other company, they had another question for me. And I couldn't get answers from them to my questions. They always had to go consult someone else. Their last question to me was something that I had to ask RACO about. RACO was very helpful - answered my question with no fooling around. Then asked if I knew they did borrower cards, too! No, I did not. And at that point I was tired of dealing with the other company.
We use the standard 14-digit bar code - the last digit being a check digit. We have a wallet card and a key tag, using our own art work.
As patrons come in, I just swap their old card for the new one. I have to change it in our system. Change it in Overdrive Library Card Manager (where you add them initially) and then go to Overdrive MarketPlace and merge their old number with the new one. A few steps, but not bad.
You need to upload a new record into MeL. Look up your patron by name in MeL, make sure the new one is there and that there is nothing current on the old one, then delete the old one. Not a big deal if you can keep them from using the old number. There were a couple of people that I had to put stops on the old number to get them to stop using it.
One thing I just discovered is that I forgot that Transparent Language and ComicsPlus and RBDigital had to know how many digits, and the digits your numbers begin with (just got that taken care of).
T.A. Cutler Memorial Library
We faced this situation before we went live on Overdrive and RBDigital last year. We had alphanumeric barcodes that included a space, which resulted in coding issues every time we tried to integrate via SIP2 with any electronic resources, including MeLCat when we went live with NCIP enhancements and Freading when we added ebooks for the first time.
So we switched to 14-digit barcodes early last year. We're still implementing the changeover. As someone brings in an old card we update their registration record and issue a new card with new number. We contacted MeLCat before we initiated the changeover and Freading after. We also let Overdrive and RBDigital know they should only accept patron accounts that match the new format, in order to encourage active patrons to bring in their card for a replacement and to make sure no one fell through the cracks.
We didn't need to purchase the plastic cards, because our previous stock were blank and we place a barcode sticker on the card and a matching digit sticker on the registration card (Data2 is the source of our two-part barcode stickers).
It has been approximately 10 months since we initiated the changeover. We can tell at a glance whether an account has been updated yet and we only update accounts as needed (as with any library, we have many inactive accounts and I saw no reason to renumber all of them). I think we've updated approximately 850-1000 accounts in the 10-month period whereas our patron file (active and inactive) contains about 4500 records.
I would totally do it again. There hasn't been a great deal of labor involved, there has been very little pushback from our patrons (some aren't so keen on entering 14 digits where they previously only needed to enter 6, but they accept the trade-off with increased digital access), the cost was under $1000, and the headaches associated with SIP2 are gone.
Milan Public Library
We use vanguard for the plastic cards, with the key card and a little barcode tail that we put on their application. When we switched to Vanguard, years ago, they handled the barcode changing but I barely remember that. This one card does melcat, our system and overdrive. We don't have the RBD thingy. Our automation system is Autographics/Verso.